PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
175
PTP graphs application
Use the PTP Graphs application to monitor the message timing between Master
and Slave in a PTP network.
For more information on PTP operations and settings,
(See Configure the
reference settings.)
and
(See PTP introduction.)
NOTE.
Option MP-IP-MEAS must be installed to use the PTP Graphs application.
PTP Graphs application
banner
Select and hold anywhere on the PTP Graphs application tile to open the
available options. (See
Figure 160
.)
Figure 160: PTP Graphs application banner
These options adjust the PTP Graphs application appearance:
•
The icon expands the PTP Graphs application tile to the full screen.
The icon collapses the tile back to its original size.
•
The icon expands the tile vertically. If the tile expands it covers the
tile above or below, depending on whether you are expanding the top or
bottom quarter tile. The icon sets the tile to quarter tile size.
•
The icon opens the PTP Graphs application settings menu to adjust
the tile settings. Use this menu to adjust the PTP Trend Interval.
NOTE.
After the PTP Graphs application settings menu is opened, the icon
displays. Select this icon to move the settings menu horizontally.
