PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
187
Video Port SFP 1 and SFP 2.
When the Video button under the Test Signal settings
is selected video port SFP 1 and SFP 2 can be Enabled or Disabled using the
button next to name of each port.
When enabled, each port is configured using the Destination Address and
Destination Port.
NOTE.
The Source IP Address, Source Port, Source MAC Address, and
Destination MAC Address will be automatically configured based on the
Destination Address and Destination Port.
Figure 175: Video Port SFP configuration
Audio test signal options
These options are available when the Audio
button under the Test Signal settings
is selected.
•
Enable Audio
: Use this button to enable or disable the audio test signal.
•
Channels
: Use this setting to select either 2 or 8 channels.
•
Frequency
: Use this setting to select a 1 kHz frequency or Multiple
•
frequencies.
•
Amplitude
: Use this setting to choose from these selections:
o
Mute
: always available
o
-20 dBFS
: available when Frequency is set to 1 kHz
o
-18 dBFS
: available when Frequency is set to 1 kHz
o
Multiple
: available when Frequency is set to Multiple
•
Sample Depth (all Channels)
: This setting lists the sample depth of all
channels.
