PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
148
IP Session application
The IP Session application uses three tabs to display status of various IP stream
parameters. Select any of the tab titles to view the associated information: Layer
1/2, Video, Audio, Data, PTP, or NMOS. (See
Figure 137
.)
NOTE.
Option MP2-IP-MEAS must be installed to use the IP Session application.
The display shows only Path 1 unless you enable ST2022-7 Seamless Switching,
(See Configure the instrument for HDR/WCG monitoring.)
There is a difference between “Port” and “Path”. The Port is the physical SPF
port that is used to input the 10 GbE signal. Path 1 and Path 2 are the signal
paths to be used for seamless switching. This differentiation is being made since it
is possible for both Path 1 and Path 2 to use a single Port.
Figure 137: IP Session application display
IP Session application
banner
Select and hold anywhere on the IP Session application tile to open the available
options. (See
Figure 138
.)
Figure 138: IP Session application banner
