Telestream PRISM MPI2-25 User Manual Download Page 130

Page: 130 / 260

PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual

109

Vector application settings

menu

The Vector application settings menu figure shows the available options. (See

Figure 97

Figure 97: Vector application settings menu

Bar Targets.

Use this setting to choose 75% or 100% scaling.

IQ Axis.

Use the button to turn the

IQ Axis On

Off

Gain.

Use this setting to select one of the trace vector magnifications:

x10

Convert to Rec. 709.

Turn this setting

to allow the trace displays to convert

the Gamma and Color Gamut settings for the signal to SDR Narrow and BT. 709
(requires Option MP2-PROD).

NOTE.

Convert to Rec. 709 auto converts to BT.709, otherwise the graticule

selection must be manually changed.

(See Configure the instrument for

HDR/WCG monitoring.)

Convert to Rec. 709 mode is not supported for SD signals.

Summary of Contents for PRISM MPI2-25





































































































































































































































































Search results

Summary of Contents for PRISM MPI2-25

Reviews:

Related manuals for PRISM MPI2-25

Brands by name

Popular brands

Telestream PRISM MPI2-25, User Manual

Search results

Summary of Contents for PRISM MPI2-25

Reviews:

Related manuals for PRISM MPI2-25

Brands by name

Popular brands