PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
145
These options adjust the IP Status application appearance:
•
The icon expands the IP Status application tile to the full screen. The
icon collapses the tile back to its original size.
•
The icon expands the tile vertically. If the tile expands it covers the tile
above or below, depending on whether you are expanding the top or
bottom quarter tile. The icon sets the tile to quarter tile size.
•
The icon opens the IP Status application settings menu to adjust the
tile settings. Use this menu to select Port 1, Port 2 or Both.
NOTE.
After the IP Status application settings menu is opened, the icon
displays. Select this icon to move the settings menu horizontally.
To view Port 1 and Port 2
1.
Launch the IP Status application in one of the tiles (select and hold in the tile
and select
IP Status
from the list of applications).
2.
Open the IP Status settings menu; select and hold in the tile and select the
icon. (See
Figure 135
.)
3.
In the IP Status settings menu select
Both
to monitor both Port 1 and Port 2.
Figure 135: IP Status port settings
With both ports selected there are two traffic bars showing the amount of traffic
on each port and a traffic table that now indicates a Port column. (See
Figure
136
.)
•
The active monitored streams are always displayed at the top of the list.
•
The columns are sortable.
•
The selected input is now highlighted in the ID column.
•
When the row has a yellow gradient it indicates a signal that was present
and is now gone. Select the reset button at the right side of the banner (at
top) to clear the signals that are no longer there.
