PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
188
The audio test signal has these values in each channel when the Frequency and
Amplitude is set to Multiple in the settings menu.
Table 14:
Multiple frequencies and levels per channel
Chan
Amp (dBFS)
Freq (Hz)
1
-18
240
2
-22
480
3
-20
360
4
-28
120
5
-24
600
6
-26
1200
7
-30
1800
8
-32
2400
Audio Transport.
These options are available under the Audio Transport
settings.
•
Packet Time
: Use this option to select between 125 µs or 1 ms
packet
times.
•
RTP Payload Type
: Use this setting to give the generated IP stream a
RTP Payload Type number.
NOTE.
Each generated IP stream must have a unique RTP Payload Type
number.
Audio Port SFP 1 and SFP 2.
When the Audio button under the Test Signal
settings is selected audio port SFP 1 and SFP 2 can be enabled or disabled
using the button next to name of each port.
When enabled, each port is configured using the Destination Address and
Destination Port.
NOTE.
The Source IP Address, Source Port, Source MAC Address, and
Destination MAC Address will be automatically configured based on the
Destination Address and Destination Port.
