PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
21
MPX2-25 rear panel connectors
The MPX2–25 rear panel figure shows the external connections
to the rear panel of the instrument. (See
Figure 9
.) A description
of each connector is provided.
See Front panel controls
for
information about the front panel connectors.
Figure 9: PRISM MPX2-25 rear panel
Table 4:
Descriptions of PRISM MPX2-25 rear panel connectors
Item number
(See Figure 9.)
Connector label,
symbol, or end
Description
1
Connector is for an AC power source.
2
DP
Two DisplayPort outputs are for external monitors. The output video format is
1920
×
1080.
1 2
3
SERIAL
Serial interface, 9-pin connector, is not used.
4
Ethernet port is a standard RJ-45 connector for 10/100/1000Base-T Ethernet cable.
5
AUX OUT 2
SDI output of the selected SDI, ST2022, or ST2110 input:
§
Quadlink inputs (4k/8k) the Aux out is link 1
§
ST2110-20/30 inputs are supported.
6
AUX OUT 1
SDI output of the selected SDI, ST2022, or ST2110 input:
§
Quadlink inputs (4k/8k) the Aux out is link 1
§
ST2110-20/30 inputs are supported.
7
25/100GE
Two QSFP28 ports are for future functionality.
8
1/10GE
SFP+ IP port is for future functionality.
9
10/25GE
SDI I/O
Two SFP+ module slots can be configured for SDI or IP applications.
•
10/25GE Two optional SFP+ ports are for 10/25GbE Ethernet applications. See
MP-SFP products for available modules.
•
SDI I/O Two optional SFP+ ports can provide up to four SDI signal loop-through
outputs, up to 12G for future functionality.
