PRISM MPI2-25 and MPX2-25 Media Analysis Platform User Manual
xiv
Important Safety Information
This manual contains information and warnings that must be followed by the user for safe
operation and to keep the product in a safe condition.
To safely perform service on this product, see the Service safety summary that follows the
General safety summary.
General Safety Summary
Use the product only as specified. Review the following safety precautions to avoid injury
and prevent damage to this product or any products connected to it. Carefully read all
instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow generally accepted
safety procedures in addition to the safety precautions specified in this manual.
The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove the cover for
repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is operating correctly.
While using this product, you may need to access other parts of a larger system. Read the
safety sections of the other component manuals for warnings and cautions related to operating
the system.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
To Avoid Fire or Personal Injury
Use proper power cord:
Use only the power cord specified for this product and certified for
the country of use. Do not use the provided power cord for other products.
Ground the product:
This product is grounded through the grounding conductor of the power
cord. To avoid electric shock, the grounding conductor must be connected to earth ground.
Before making connections to the input or output terminals of the product, ensure that the
product is properly grounded. Do not disable the power cord grounding connection.
Power disconnect:
The power cord disconnects the product from the power source. See
instructions for the location. Do not position the equipment so it is difficult to operate the
power cord; it must remain accessible to the user at all times to allow for quick disconnection
if needed.
Observe all terminal ratings:
To avoid fire or shock hazard, observe all rating and markings
on the product. Consult the product manual for further ratings information before making
connections to the product. Do not apply a potential to any terminal, including the common
terminal, that exceeds the maximum rating of that terminal.
Do not operate without covers:
Do not operate this product with covers or panels removed, or
with the case open. Hazardous voltage exposure is possible.
