Syntax
VX1410 IntelliFrame Instruction Manual
3–23
NOTE
.
Do not include the
<
,
>
,
{,}, or |
symbols when entering the actual value for
a parameter.
Separate multiple parameters after a command header with a comma. For
example:
STATus:QUEStionable:TEMPerature:LIMit DELTa1,30
Table 3–13 defines the command and response parameter types for the VX1410
IntelliFrame.
Table 3–13: Parameter Types for Syntax Descriptions
Parameter Type
Description
Example
Boolean
Boolean number or value (command parameter,
response returns a 1 or 0)
ON or 1
OFF or 0
Block
A specified length of block formatted data
(command parameter)
#212xxxxxxxxxxxx
where 2 indicates that
the following 2 digits
(12) specify the length
of the following block
data (xxx...).
Nondecimal numeric
Integers in hex (#H), octal (#Q), or binary (#B)
format (command parameter).
#H00FF, #B010101,
#Q0753
NR1
Integers (response parameter)
0, 1, 15
NR2
Decimal numbers (response parameter)
1.2, 3.141516, 6.5
NRf
Integer, decimal, or floating point number as well
as MAX and MIN for setting the largest or
smallest value the instrument allows. (command
parameter)
1, 3E+1, MAX, 2.6
discrete
A list of specific values (command or response
parameter)
P24, P5EXT, N2, ...
String
Alphanumeric characters within quotation marks
(command or response parameter)
“No error”
Parameter values that appear in this manual are often enclosed in curly braces
({}) separated by a vertical line. This vertical line means the same thing as the
word “or.” For example, values for the parameter <Boolean> are
{0|1|OFF|ON}
This is the same thing as saying “0 or 1 or OFF or ON.” Any single value is a
valid parameter.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
