VX1410 IntelliFrame Instruction Manual
3–115
VXIMonitor Subsystem
This section describes the commands and queries in the VXIMonitor subsystem.
Use the TINTerval command and query to specify or read the time interval that
the VXI Monitor monitors the VXI bus. Use the REPeat command to enable or
disable the repeat mode and use the query to return the status of the repeat mode.
The VXIMonitor subsystem controls the parameters shown in Figure 3–10.
Figure 3–10: VXIMonitor Subsystem Hierarchy
The VXIMonitor monitors the following VXI bus signals: BERR, SYSFAIL,
ACFAIL, and AS. Use the VXIMonitor commands to set or query the time
interval that the VXI Monitor monitors the bus and how often to monitor the
bus.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
