![background image](http://html1.mh-extra.com/html/tektronix/intelliframe-vx1410/intelliframe-vx1410_instruction-manual_1077698127.webp)
System Subsystem
3–86
VX1410 IntelliFrame Instruction Manual
SYSTem:COMMunicate:SERial:PRESet
Preset logical groups of RS-232 port control parameters. The default mode sets
all RS-232 settings to a known state. The RAW and TERMinal modes change
only a subset of the parameters. Use RAW when connected to a computer and
use TERMinal when connected to a computer display terminal.
The command “T” followed by a new line character (^J) configures the RS-232
port for terminal operation when it is currently in the RAW mode.
There are no associated queries with these commands.
Table 3–15 lists the preset values for each PRESet command.
Table 3–15: Effects of :PRESet on Serial Port Parameters
SERial Port Parameter
[:ALL]
:RAW
:TERMinal
BAUD
9600
NC
1
NC
1
BITS
8
NC
1
NC
1
CONTrol:RTS
ON
NC
1
NC
1
ECHO
OFF
OFF
ON
ERESponse
OFF
OFF
ON
LBUFfer
OFF
OFF
ON
PACE
NONE
NONE
XON
PARity
NONE
NC
1
NC
1
SBITs
1
NC
1
NC
1
1
The entry NC in a field means the value is not changed.
None
Not Applicable
None
See Table 3–15.
Command:
All SYSTem:COMMunicate:SERial commands
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com