TECO F33 Series, Instruction Manual, Page: 98 / 192

Functional Description 95
Communication information
Brake Engage Time [33E]
The brake engage time is the time the load is held to
engage a mechanical brake.
Communication information
Wait Before Brake Time [33F]
The brake wait time is the time to keep brake open and
to hold the load, either in order to be able to speed up
immediately, or to stop and engage the brake.
Communication information
Vector Brake [33G]
Braking by increasing the internal electrical losses in
the motor.
Communication information
11.3.5 Speed [340]
Menu with all parameters for settings regarding to
speeds, such as Min/Max speeds, Jog speeds, Skip
speeds.
Minimum Speed [341]
Sets the minimum speed. The minimum speed will
operate as an absolute lower limit. Used to ensure the
motor does not run below a certain speed and to main-
tain a certain performance.
Depend on:
4xmotor sync speed, 1500 rpm for 1470
rpm motor.
Modbus Instance no/DeviceNet no: 43113
Profibus slot/index 169/17
Fieldbus format Int, 1=1 rpm
Modbus format Int, 1=1 rpm
Default: 0.00 s
Range: 0.00–3.00 s
Modbus Instance no/DeviceNet no: 43114
Profibus slot/index 169/18
Fieldbus format Long, 1=0.01 s
Modbus format EInt
Default: 0.00 s
Range: 0.00–30.0 s
Modbus Instance no/DeviceNet no: 43115
Profibus slot/index 169/19
Fieldbus format Long, 1=0.01 s
Modbus format EInt
33E Brk Engage
Stp 0.00s
A
33F Brk Wait
Stp 0.00s
A
Default: Off
Off 0
Vector brake switched off. VSD brakes nor-
mal with voltage limit on the DC link.
On 1
Maximum VSD current (I
CL
) is available for
braking.
Modbus Instance no/DeviceNet no: 43116
Profibus slot/index 169/20
Fieldbus format UInt
Modbus format UInt
Default: 0 rpm
Range: 0 - Max Speed
Dependent on: Set/View ref [310]
NOTE: A lower speed value than the set minimum speed
can be shown in the display due to motor slip.
33G Vector Brake
Stp Off
A
341 Min Speed
Stp 0rpm
A