TECO F33 Series, Instruction Manual, Page: 78 / 192

Functional Description 75
Select Set [241]
Here you select the parameter set. Every menu
included in the parameter sets is designated A, B, C or
D depending on the active parameter set. Parameter
sets can be selected from the keyboard, via the pro-
grammable digital inputs or via serial communication.
Parameter sets can be changed during the run.
If the
sets are using different motors (M1 to M4) the set will
be changed when the motor is stopped.
Communication information
The active set can be viewed with function [721] FI sta-
tus.
Copy Set [242]
This function copies the content of a parameter set into
another parameter set.
Communication information
A>B means that the content of parameter set A is cop-
ied into parameter set B.
Default: A
Selection: A, B, C, D, DigIn, Com, Option
A 0
Fixed selection of one of the 4 parameter
sets A, B, C or D.
B 1
C 2
D 3
DigIn 4
Parameter set is selected via a digital
input. Define which digital input in menu
[520], Digital inputs.
Com 5
Parameter set is selected via serial com-
munication.
Option 6
The parameter set is set via an option.
Only available if the option can control the
selection.
Modbus Instance no/DeviceNet no: 43022
Profibus slot/index 168/181
Fieldbus format UInt
Modbus format UInt
NOTE: Parameter set cannot be changed during run if
this also would imply a change of the motor set (M2-
M4).
241 Select Set
Stp A
A
Default: A>B
A>B 0 Copy set A to set B
A>C 1 Copy set A to set C
A>D 2 Copy set A to set D
B>A 3 Copy set B to set A
B>C 4 Copy set B to set C
B>D 5 Copy set B to set D
C>A 6 Copy set C to set A
C>B 7 Copy set C to set B
C>D 8 Copy set C to set D
D>A 9 Copy set D to set A
D>B 10 Copy set D to set B
D>C 11 Copy set D to set C
Modbus Instance no/DeviceNet no: 43021
Profibus slot/index 168/180
Fieldbus format UInt
Modbus format UInt
NOTE: The actual value of menu [310] will not be copied
into the other set.
242 Copy Set
Stp A
>
B
A