TECO F33 Series, Instruction Manual, Page: 86 / 192

Functional Description 83
Communication information
Liquid cooling low level [25T]
Delay time starts counting when the fault disappears.
When the time delay has elapsed, the alarm will be
reset if the function is active.
Communication information
Liquid Cooling Low level Trip Type [25U]
Select the preferred way to react to an alarm trip.
Communication information
11.2.8 Serial Communication [260]
This function is to define the communication parame-
ters for serial communication. There are two types of
options available for serial communication, RS232/
485 (Modbus/RTU) and fieldbus modules (Profibus,
DeviceNet and Ethernet). For more information see
chapter Serial communication and respective option
manual.
Comm Type [261]
Select RS232/485 [262] or Fieldbus [263].
RS232/485 [262]
Press Enter to set up the parameters for RS232/485
(Modbus/RTU) communication.
Baud rate [2621]
Set the baud rate for the communication.
Address [2622]
Enter the unit address for the VSD.
Modbus Instance no/DeviceNet no: 43098
Profibus slot/index 168/240
Fieldbus format UInt
Modbus format UInt
Default: Off
Off 0 Off
1–3600 1–3600 1–3600 s
Modbus Instance no/DeviceNet no: 43099
Profibus slot/index 169/3
Fieldbus format Long, 1=1 s
Modbus format EInt
Default: Trip
Selection: Same as menu [25B]
Modbus Instance no/DeviceNet no: 43100
Profibus slot/index 169/4
Fieldbus format UInt
Modbus format UInt
25T LC Level
Stp Off
A
25U LC Level TT
Stp Trip
A
Default: RS232/485
RS232/485 0 RS232/485 selected
Fieldbus 1
Fieldbus selected (Profibus, DeviceNet or
Modbus/TCP)
NOTE: Toggling the setting in this menu will perform a
soft reset (re-boot) of the Fieldbus module.
NOTE: This baud rate is only used for the isolated
RS232/485 option.
Default: 9600
2400 0
Selected baud rate
4800 1
9600 2
19200 3
38400 4
NOTE: This address is only used for the isolated RS232/
485 option.
261 Com Type
Stp RS232/485
A
262 RS232/485
Stp
2621 Baudrate
Stp 9600
A