TECO F33 Series, Instruction Manual, Page: 66 / 192

Functional Description 63
11. Functional Description
This chapter describes the menus and parameters in
the software. You will find a short description of each
function and information about default values, ranges,
etc. There are also tables containing communication
information. You will find the Modbus, DeviceNet and
Fieldbus address for each parameter as well as the
enumeration for the data.
Description of table layout
Resolution of settings
The resolution for all range settings described in this
chapter is 3 significant digits. Exceptions are speed val-
ues which are presented with 4 significant digits. Table
22 shows the resolutions for 3 significant digits
.
11.1 Preferred View [100]
This menu is displayed at every power-up. During opera-
tion, the menu [100] will automatically be displayed
when the keyboard is not operated for 5 minutes. The
automatic return function will be switched off when the
Toggle and Stop key is pressed simultaneously. As
default it displays the actual current.
Menu [100], Preferred View displays the settings made
in menu [110], 1st line, and [120], 2nd line. See Fig.
69.
Fig. 69 Display functions
11.1.1 1st Line [
110
]
Sets the content of the upper row in the menu [100]
Preferred View
.
Communication information
NOTE: Functions marked with the sign cannot be
changed during Run Mode.
Default:
Selection or
range Integer value of
selection
Description
Table 22
3 Digit Resolution
0.01-9.99 0.01
10.0-99.9 0.1
100-999 1
1000-9990 10
10000-99900 100
Menu no. Menu name
Status
Selected value
100 0rpm
Stp 0.0A
A
Default: Process Val
Dependent on menu
Process Val 0 Process value
Speed 1 Speed
Torque 2 Torque
Process Ref 3 Process reference
Shaft Power 4 Shaft power
El Power 5 Electrical power
Current 6 Current
Output volt 7 Output voltage
Frequency 8 Frequency
DC Voltage 9 DC voltage
Heatsink Tmp 10 Heatsink temperature
Motor Temp 11 Motor temperature
VSD Status 12 VSD status
Run Time 13 Run Time
Energy 14 Energy
Mains Time 15 Mains time
Modbus Instance no/DeviceNet no: 43001
Profibus slot/index 168/160
Fieldbus format UInt
Modbus format UInt
100 (1st Line)
Stp (2nd Line)
A
110 1st Line
Stp Process Val
A