TECO F33 Series, Instruction Manual, Page: 32 / 192

Getting Started 29
5.4 Local control
Manual control via the control panel can be used to
carry out a test run.
Use a 400 V motor and the control panel.
5.4.1 Switch on the mains
Close the door to the VSD. Once the mains is switched
on, the VSD is started and the internal fan will run for 5
seconds.
5.4.2 Select manual control
Menu [100], Preferred View is displayed when started.
1. Press to display menu [200], Main Setup.
2. Press to display menu [210], Operation.
3. Press to display menu [211], Language.
4. Press to display menu [214], Reference Control.
5. Select Keyboard using the key and press to
confirm.
6. Press to get to menu [215], Run/Stop Control.
7. Select Keyboard using the key and press to
confirm.
8. Press to get to previous menu level and then
to display menu [220], Motor Data.
5.4.3 Set the Motor Data
Enter correct motor data for the connected motor.
9. Press to display menu [221].
10.Change the value using the and keys. Con-
firm with .
11.Press to display menu [222].
12.Repeat step 9 and 10 until all motor data is entered.
13.Press twice and then to display menu [100],
Preferred View.
5.4.4 Enter a Reference Value
Enter a reference value.
14.Press until menu [300], Process is displayed.
15.Press to display menu [310], Set/View reference
value.
16.Use the and keys to enter, for example, 300
rpm. We select a low value to check the rotation
direction without damaging the application.
5.4.5 Run the VSD
Press the key on the control panel to run the motor
forward.
If the motor is running the main connections are OK.
NEXT
ENTER ENTER
ENTER ENTER
NEXT
ENTER ENTER
NEXT
ENTER ENTER
ESC ESC NEXT
ENTER ENTER
ENTER ENTER
NEXT
ESC ESC PREV
NEXT
ENTER ENTER