TECO F33 Series, Instruction Manual, Page: 71 / 192

68 Functional Description
than one motor you need to select the correct motor in
menu [212] before entering motor data.
Motor Voltage [221]
Set the nominal motor voltage.
Communication information
Motor Frequency [222]
Set the nominal motor frequency
.
Communication information
Motor Power [223]
Set the nominal motor power.
Communication information
P
NOM
is the nominal VSD power.
NOTE: The parameters for motor data cannot be
changed during run mode.
NOTE: The default settings are for a standard 4-pole
motor according to the nominal power of the VSD.
NOTE: Parameter set cannot be changed during run if
the sets is set for different motors.
NOTE: Motor Data in the different sets M1 to M4 can be
revert to default setting in menu [243], Default>Set.
WARNING: Enter the correct motor data to
prevent dangerous situations and assure
correct control.
Default:
400 V for JNFX40 and 48
500 V for JNFX50 and 52
690 V for JNFX69
Range: 100-700 V
Resolution 1 V
NOTE: The Motor Volts value will always be stored as a 3
digit value with a resolution of 1 V.
Modbus Instance no/DeviceNet no: 43041
Profibus slot/index 168/200
Fieldbus format
Long,
1=0.1 V
Modbus format EInt
Default: 50 Hz
Range: 24-300 Hz
Resolution 1 Hz
221 Motor Volts
Stp M1: 400V
A
222 Motor Freq
Stp M1: 50Hz
A
Modbus Instance no/DeviceNet no: 43042
Profibus slot/index 168/201
Fieldbus format Long, 1=1 Hz
Modbus format EInt
Default: P
NOM
VSD
Range: 1W-120% x P
NOM
Resolution 3 significant digits
NOTE: The Motor Power value will always be stored as a
3 digit value in W up to 999 W and in kW for all higher
powers.
Modbus Instance no/DeviceNet no: 43043
Profibus slot/index 168/202
Fieldbus format
Long,
1=1 W
Modbus format EInt
223 Motor Power
Stp M1: (P
NOM
) kW
A