TECO F33 Series, Instruction Manual, Page: 8 / 192

Introduction 5
1. Introduction
F33 is used most commonly to control and protect
pump and fan applications that put high demands on
flow control, process uptime and low maintenance
costs. It can also be used for e.g. compressors and
blowers. The used motor control method is V/Hz-con-
trol. Several options are available, listed in chapter 13.
page 147, that enable you to customize the variable
speed drive for your specific needs
.
The following symbols can appear in this manual.
Always read these first before continuing:
Users
This instruction manual is intended for:
• installation engineers
• maintenance engineers
• operators
• service engineers
Motors
The variable speed drive is suitable for use with stand-
ard 3-phase asynchronous motors. Under certain condi-
tions it is possible to use other types of motors. Contact
your supplier for details.
1.1 Delivery and unpacking
Check for any visible signs of damage. Inform your sup-
plier immediately of any damage found. Do not install
the variable speed drive if damage is found.
The variable speed drives are delivered with a template
for positioning the fixing holes on a flat surface. Check
that all items are present and that the type number is
correct.
1.2 Using of the instruction
manual
Within this instruction manual the abbreviation “VSD”
is used to indicate the complete variable speed drive as
a single unit.
Check that the software version number on the first
page of this manual matches the software version in
the variable speed drive.
With help of the index and the contents it is easy to
track individual functions and to find out how to use
and set them.
The Quick Setup Card can be put in a cabinet door, so
that it is always easy to access in case of an emer-
gency.
1.3 Type code number
Fig. 1 gives an example of the type code numbering
used on all variable speed drives
.
With this code
number the exact type of the drive can be determined.
This identification will be required for type specific infor-
mation when mounting and installing. The code
number is located on the product label, on the front of
the unit.
Fig. 1 Type code number
NOTE: Read this instruction manual carefully before
starting installation, connection or working with the
variable speed drive.
NOTE: Additional information as an aid to avoid
problems.
CAUTION: Failure to follow these instructions
can result in malfunction or damage to the
variable speed drive.
WARNING: Failure to follow these instructions
can result in serious injury to the user in addition
to serious damage to the variable speed drive.
HOT SURFACE: Failure to follow these
instructions can result in injury to the user.
!
Position
for
0003-
0046
Position
for
0060-
1500
Configuration
1 1 VSD type
F33
V33
2 2 Supply voltage
40/48=400 V
mains
50/52=525 V
mains
69=690 V mains
JNFX48-0175- 54 C E
– – – A – N N N N A N –
Position number:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18