TECO F33 Series, Instruction Manual, Page: 122 / 192

Functional Description 119
AnIn1 Max [5132]
Parameter to set the maximum value of the external
reference signal. Only visible if [512] = User mA/V
.
Communication information
Special function: Inverted reference signal
If the AnIn minimum value is higher than the AnIn maxi-
mum value, the input will act as an inverted reference
input, see Fig. 104.
Fig. 104 Inverted reference
AnIn1 Bipol [5133]
This menu is automatically displayed if AnIn1 Setup is
set to User Bipol mA or User Bipol V. The window will
automatically show mA or V range according to selected
function. The range is set by changing the positive max-
imum value; the negative value is automatically
adapted accordingly. Only visible if [512] = User Bipol
mA/V. The inputs RunR and RunL input need to be
active, and Rotation, [219], must be set to “R+L”, to
operate the bipolar function on the analogue input.
Communication information
AnIn1 Function Min [5134]
With AnIn1 Function Min the physical minimum value is
scaled to selected process unit. The default scaling is
dependent of the selected function of AnIn1 [511].
Table 25 shows corresponding values for the min and
max selections depending on the function of the ana-
logue input [511].
Communication information
AnIn1 Function Value Min [5135]
With AnIn1 Function ValMin you define a user-defined
value for the signal. Only visible when user-defined is
selected in menu [5134].
Default: 10.00 V/20.00 mA
Range:
0.00–20.00 mA
0–10.00 V
Modbus Instance no/DeviceNet no: 43204
Profibus slot/index 169/108
Fieldbus format Long
Modbus format EInt
Default: 0.00–10.00 V
Range: 0.0–20.0 mA, 0.00–10.00 V
5132 AnIn1 Max
Stp 10.0V/20.00mA
0 1 0 V
100 %
n
(NG_06-F25)
Invert
Ref
AnIn Min >
AnIn Max
5133 AnIn1 Bipol
Stp 10.00V
A
Modbus Instance no/DeviceNet no: 43205
Profibus slot/index 169/109
Fieldbus format Long
Modbus format EInt
Default: Min
Min 0 Min value
Max 1 Max value
User-
defined
2 Define user value in menu [5135]
Table 25
AnIn Function Min Max
Speed Min Speed [341] Max Speed [343]
Torque 0% Max Torque [351]
Process Ref Process Min [324] Process Max [325]
Process Value Process Min [324] Process Max [325]
Modbus Instance no/DeviceNet no: 43206
Profibus slot/index 169/110
Fieldbus format UInt
Modbus format UInt
Default: 0.000
Range: -10000.000 – 10000.000
5134 AnIn1 FcMin
Stp Min
A
5135 AnIn1 VaMin
Stp 0.000
A