TECO F33 Series, Instruction Manual, Page: 91 / 192

88 Functional Description
Example:
Create a user unit named kPa.
1. When in the menu [323] press Next to move the cur-
sor to the right most position.
2. Press the + key until the character k is displayed.
3. Press Next.
4. Then press the + key until P is displayed and con-
firm with Next.
5. Repeat until you have entered kPa.
Communication information
When sending a unit name you send one character at a
time starting at the right most position.
Process Min [324]
This function sets the minimum process value allowed.
Communication information
Process Max [325]
This menu is not visible when speed, torque or fre-
quency is selected. The function sets the value of the
maximum process value allowed.
Communication information
Ratio [326]
This menu is not visible when speed, frequency or
torque is selected. The function sets the ratio between
the actual process value and the motor speed so that it
Å 38 ) 87
Ä 39 * 88
Ö 40 + 89
a 41 , 90
á 42 - 91
b 43 . 92
c 44 / 93
d 45 : 94
e 46 ; 95
é 47 < 96
ê 48 = 97
ë 49 > 98
f 50 ? 99
g 51 @ 100
h 52 ^ 101
i 53 _ 102
í 54
°
103
j 55
2
104
k 56
3
105
l 57
Default: No characters shown
Modbus Instance no/DeviceNet no:
43304
43305
43306
43307
43308
43309
Character
No. for serial
comm.
Character
No. for serial
comm.
323 User Unit
Stp
A
Profibus slot/index
169/208
169/209
169/210
169/211
169/212
169/213
Fieldbus format UInt
Modbus format UInt
Default: 0
Range:
0.000-10000 (Speed, Torque, F(Speed),
F(Torque))
-10000– +10000 (F(AnIn, PT100, F(Bus))
Modbus Instance no/DeviceNet no: 43310
Profibus slot/index 169/214
Fieldbus format Long, 1=0.001
Modbus format EInt
Default: 0
Range: 0.000-10000
Modbus Instance no/DeviceNet no: 43311
Profibus slot/index 169/215
Fieldbus format Long, 1=0.001
Modbus format EInt
324 Process Min
Stp 0
A
325 Process Max
Stp 0
A