TECO F33 Series, Instruction Manual, Page: 10 / 192

Introduction 7
1.5 Dismantling and scrapping
The enclosures of the drives are made from recyclable
material as aluminium, iron and plastic. Each drive con-
tains a number of components demanding special
treatment, for example electrolytic capacitors. The cir-
cuit boards contain small amounts of tin and lead. Any
local or national regulations in force for the disposal
and recycling of these materials must be complied with.
1.5.1Disposal of old electrical and
electronic equipment
This information is applicable in the European Union
and other European countries with separate collection
systems.
This symbol on the product or on its packaging indi-
cates that this product shall be treated according to the
WEEE Directive. It must be taken to the applicable col-
lection point for the recycling of electrical and elec-
tronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potentially negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materi-
als will help to conserve natural resources. For more
detailed information about recycling this product,
please contact the local distributor of the product .
Table 1 Standards
Market Standard Description
European
Machine Directive 98/37/EEC
EMC Directive 2004/108/EEC
Low Voltage Directive 2006/95/EC
WEEE Directive 2002/96/EC
All
EN 60204-1
Safety of machinery - Electrical equipment of machines
Part 1: General requirements.
Machine Directive:
Manufacturer’s certificate
acc. to Appendix IIB
EN(IEC)61800-3:2004
Adjustable speed electrical power drive systems
Part 3: EMC requirements and specific test methods.
EMC Directive:
Declaration of Conformity and
CE marking
EN(IEC)61800-5-1 Ed.
2.0
Adjustable speed electrical power drive systems Part 5-1.
Safety requirements - Electrical, thermal and energy.
Low Voltage Directive: Declaration of Conformity and
CE marking
IEC 60721-3-3
Classification of environmental conditions. Air quality chemical vapours, unit in
operation. Chemical gases 3C1, Solid particles 3S2.
Optional with coated boards
Unit in operation. Chemical gases Class 3C2, Solid particles 3S2.
UL508C UL Safety standard for Power Conversion Equipment
USA
UL and UL
≥
90 A only
UL 840
UL Safety standard for Power Conversion Equipment power conversion equip-
ment.
Insulation coordination including clearances and creepage distances for electri-
cal equipment.
Russian GOST R For all sizes