TECO F33 Series, Instruction Manual, Page: 12 / 192

Mounting 9
2. Mounting
This chapter describes how to mount the VSD.
Before mounting it is recommended that the installa-
tion is planned out first.
• Be sure that the VSD suits the mounting location.
• The mounting site must support the weight of the
VSD.
• Will the VSD continuously withstand vibrations and/
or shocks?
• Consider using a vibration damper.
• Check ambient conditions, ratings, required cooling
air flow, compatibility of the motor, etc.
• Know how the VSD will be lifted and transported.
2.1 Lifting instructions
Recommended for VSD models -0090 to -0250
Fig. 2 Lifting VSD model -0090 to -0250
Recommended for VSD models -0300 to -1500
Fig. 3 Remove the roof plate.
Fig. 4 Remove roof unit
Note: To prevent personal risks and any damage to the
unit during lifting, it is advised that the lifting methods
described below are used.
Load: 56 to
74 kg
Lifting eye
A
DETAIL A
Terminals for roof fan
unit supply cables