TECO F33 Series, Instruction Manual, Page: 88 / 192

Functional Description 85
Communication Fault Time [2642]]
Defines the delay time for the trip/warning.
Communication information
Ethernet [265]
Settings for Ethernet module (Modbus/TCP). For further
information, see the Fieldbus option manual.
IP Address [2651]
MAC Address [2652]
Subnet Mask [2653]
Gateway [2654]
DHCP [2655]
Fieldbus Signals [266]
Defines modbus mapping for additional process values.
For further information, see the Fieldbus option man-
ual.
FB Signal 1 - 16 [2661]-[266G]
Used to create a block of parameters which are read/
written via communication. 1 to 8 read + 1 to 8 write
parameters possible.
Communication information
FB Status [269]
Sub menus showing status of fieldbus parameters.
Please see the Fieldbus manual for detailed informa-
tion.
Default: 0.5 s
Range: 0.1-15 s
Modbus Instance no/DeviceNet no: 43038
Profibus slot/index 168/197
Fieldbus format Long, 1=0.1 s
Modbus format EInt
NOTE: The Ethernet module must be re-booted to
activate the below settings. For example by toggling
parameter [261]. Non-initialized settings indicated by
flashing display text.
Default: 0.0.0.0
Default: An unique number for the Ethernet module.
Default: 0.0.0.0
Default: 0.0.0.0
2642 ComFlt Time
Stp 0.5s
A
2651 IP Address
00 0. 00 0. 00 0. 00 0
2652 MAC Address
Stp 000000000000
A
2653 Subnet Mask
0. 00 0. 00 0. 00 0
2654 Gateway
0. 00 0. 00 0. 00 0
Default: Off
Selection: On/Off
Default: 0
Range: 0-65535
Modbus Instance no/DeviceNet no: 42801-42816
Profibus slot/index 167/215-167/230
Fieldbus format UInt
Modbus format UInt
2655 DHCP
Stp Off
A
2661 FB Signal 1
Stp 0
A
269 FB Status
Stp