TECO F33 Series, Instruction Manual, Page: 113 / 192

110 Functional Description
Run Times 1-6 [39H] to [39M]
Communication information
Reset Run Times 1-6 [39H1] to [39M1]
Communication information
Pump Status [39N]
11.4 Load Monitor and Process
Protection [400]
11.4.1 Load Monitor [ 410 ]
The monitor functions enable the VSD to be used as a
load monitor. Load monitors are used to protect
machines and processes against mechanical overload
and underload, e.g. a conveyer belt or screw conveyer
jamming, belt failure on a fan and a pump dry running.
See explanation in section 7.5, page 38.
Alarm Select [411]
Selects the types of alarms that are active.
Communication information
Alarm Trip [412]
Selects which alarm must cause a trip to the VSD.
Unit: h:m (hours:minutes)
Range: 0h:0m–65535h:59m.
Modbus Instance no/
DeviceNet no:
31051 hours, 31052 minutes,
31054 hours, 31055 minutes,
31057 hours, 31058 minutes,
31060 hours, 31061 minutes,
31063 hours, 31064 minutes,
31066 hours, 31067 minutes
Profibus slot/index
121/195, 121/198, 121/201,
121/204, 121/207, 121/210
Fieldbus format UInt
Modbus format UInt
Default: No
No 0
Yes 1
Modbus Instance no/DeviceNet no: 38–43, pump 1 -6
Profibus slot/index 0/37–0/42
Fieldbus format UInt
Modbus format UInt
Indication Description
C
Control, master pump, only when alternating
master is used
D Direct control
O Pump is off
E Pump error
A
39H Run Time 1
Stp h:mm
A
39H1 Rst Run Tm1
Stp No
39N Pump 123456
Stp OCD
A
Default: Off
Off 0 No alarm functions active.
Min 1
Min Alarm active. The alarm output func-
tions as an underload alarm.
Max 2
Max Alarm active. The alarm output func-
tions as an overload alarm.
Max+Min 3
Both Max and Min alarm are active. The
alarm outputs function as overload and
underload alarms.
Modbus Instance no/DeviceNet no: 43321
Profibus slot/index 169/225
Fieldbus format UInt
Modbus format UInt
Default: Off
Selection: Same as in menu [411]
411 Alarm Select
Stp Off
A
412 Alarm trip
Stp Off
A