TECO F33 Series, Instruction Manual, Page: 67 / 192

64 Functional Description
11.1.2 2nd Line [120]
Sets the content of the lower row in the menu [100]
Preferred View. Same selection as in menu [110].
11.2 Main Setup [200]
The Main Setup menu contains the most important set-
tings to get the VSD operational and set up for the
application. It includes different sub menus concerning
the control of the unit, motor data and protection, utili-
ties and automatic resetting of faults. This menu will
instantaneously be adapted to build in options and
show the required settings.
11.2.1 Operation [210]
Selections concerning the used motor, VSD mode, con-
trol signals and serial communication are described in
this submenu and is used to set the VSD up for the
application.
Language [211]
Select the language used on the LC Display. Once the
language is set, this selection will not be affected by the
Load Default command.
Communication information
Select Motor [212]
This menu is used if you have more than one motor in
your application. Select the motor to define. It is possi-
ble to define up to four different motors, M1 to M4, in
the VSD.
Communication information
Drive Mode [213]
This menu is used to set the control mode for the
motor. Settings for the reference signals and read-outs
is made in menu Process source, [321].
•
V/Hz Mode (output speed [712] in rpm)
.
Communication information
Default: Current
Default: English
English 0 English selected
Svenska 1 Swedish selected
Nederlands 2 Dutch selected
Deutsch 3 German selected
Français 4 French selected
Español 5 Spanish selected
Ру cc кий 6 Russian selected
Italiano 7 Italian selected
Č esky 8 Czech selected
Modbus Instance no/DeviceNet no: 43011
Profibus slot/index 168/170
Fieldbus format UInt
Modbus format UInt
120 2nd Line
Stp Current
A
211 Language
Stp English
A
Default: M1
M1 0
Motor Data is connected to selected
motor.
M2 1
M3 2
M4 3
Modbus Instance no/DeviceNet no: 43012
Profibus slot/index 168/171
Fieldbus format UInt
Modbus format UInt
Default: V/Hz
V/Hz 2
All control loops are related to frequency
control. In this mode multi-motor applica-
tions are possible.
NOTE: All the functions and menu read-
outs with regard to speed and rpm (e.g.
Max Speed = 1500 rpm, Min Speed=0
rpm, etc.) remain speed and rpm,
although they represent the output
frequency.
Modbus Instance no/DeviceNet no: 43013
Profibus slot/index 168/172
Fieldbus format UInt
Modbus format UInt
212 Select Motor
Stp M1
A
213 Drive Mode
Stp V/Hz
A