SoftBank 706N, User Manual

Page: 25 / 324

xxiv
Do not leave the handset for long periods of time in
a place where bright light enters the camera lens.
Light entering through a lens is concentrated and may cause
fire or equipment failure.
Take care not to pinch your finger in the hinge when
you open the handset.
This may cause injury.
Watch out for broken glass if the display or camera
lens is damaged.
The surfaces of the display and camera
lens are covered by plastic panels so as to minimize the
possibility of glass scattering. However, touching the broken
display or camera lens may cause injury.
If the display is broken and the liquid crystal leaks,
do not lick or inhale the liquid or get the liquid on
your skin. If the liquid comes into contact with your
eyes or mouth, immediately rinse your eyes or mouth
with clean water and see a doctor. If the liquid comes into
contact with your skin or clothes, immediately wipe it off with
alcohol, and wash with water and soap.
This liquid may cause loss
of eyesight or skin problems.
Battery
Compartment Screw Steel Nickel plating
Shield Cover Stainless
ー
Battery Terminal Phosphor bronze Gold plating
Printed Wiring Board epoxy resin glass epoxy
USIM Lock Polyacetal resin
ー
USIM Slot 30%GF-LCP resin/SUS
ー
microSD Slot 30%GF-LCP resin/SUS
ー
Battery Outer Package (laminated part) Aluminium PET
Outer Package (plastic part) PP resin, PC resin
ー
Terminals Copper Gold plating
Part Material Surface finish
_706N_manual_E.book xxiv ページ ２００７年２月２３日 金曜日 午後５時２１分