Smiley Lifting Solutions SPYDERCRANE PC094, Operator'S Manual

Page: 30 / 79

30
GENERAL INFORMATION
The External Features of the PC094
Front (Travel Mode, Boom raised to 0°, Hook Block removed)
1
Lift Point (right - side)
One of the two steel rings welded to the boom of the
PC094, at its horizontal center - of - gravity. Properly rigged,
the PC094 can be lifted by another lifting system at the Lift
Points.
2 Lift Point (left - side)
One of the two steel rings welded to the boom of the
PC094, at its horizontal center - of - gravity. Properly rigged,
the PC094 can be lifted by another lifting system at the Lift
Points.
3 Winch Gear Box
The housing for the winch gear assembly which turns the
Wire Rope Drum of the PC094 which ultimately raises and
lowers the hook block of the PC094.
4 Hook Storage Shackle
Located below the Hood of the PC094 is the Hook Storage
Shackle. When the PC094 is configured to Travel Mode, the
hook block is attached to this shackle.
5 Front Tie - Down Point (right - side)
One of two tie - down points at the front of the PC094. The
Front Tide - Down Points are used to tie the PC094 down to
a pallet, or transporter, but can also be used to secure
attached loads to the PC094 front fenders.
6 Front Tie - Down Point (left - side)
One of two tie - down points at the front of the PC094. The
Front Tide - Down Points are used to tie the PC094 down to
a pallet, or transporter, but can also be used to secure
attached loads to the PC094 front fenders.
7 Right Drive Wheel
One of two hydraulically - actuated drive wheels that can
propel the PC094 forwards and backwards (traveling).
8 Left Drive Wheel
One of two hydraulically - actuated drive wheels that can
propel the PC094 forwards and backwards (traveling).