Smiley Lifting Solutions SPYDERCRANE PC094, Operator'S Manual

Page: 72 / 79

72
Preventative Maintenance
Maintenance Intervals and Lubricants
Hook Lubrication
1. Use a straw attachment to lubricate the hook pivot as needed.
2. Rotate the hook to ensure complete coverage.
3.
Lubricate the safety latch.
Part Recommended Fluid/Lubricant Maintenance Interval
Grease Fittings Molybdenum Grease
NLGI No. 2 in most cases
NLGI No. 1 in very cold climates
Every 40 hours of operation or 3
months
Boom Molybdenum Grease
NLGI No. 2 in most cases
NLGI No. 1 in very cold climates
Every 40 hours of operation or 3
months
Wear Pads Molybdenum Grease
NLGI No. 2 in most cases
NLGI No. 1 in very cold climates
Replace wear pads if silver
streaks begin to appear on
bottom of boom section(s).
Winch Gear SAE 90 gear oil Replace winch gear oil after first
6 months of use and then every 2
years
Drive Wheel Gears SAE 30 oil Replace oil every 2 years
Hydraulic Fluid ISO VG 46 for temperatures above 32
°
F
ISO VG 32 for temperatures below 32
°
F
Replace the hydraulic filter after
the first 100 hours and then
every year after.
Wire Rope and Hook Chain and Cable Lube (clear) Every 40 hours of operation or 3
months