Smiley Lifting Solutions SPYDERCRANE PC094, Operator'S Manual

Page: 53 / 79

53
Operating Instructions
Using the Stabilizers of the PC094
The stabilizers of the PC094 are used to increase its surface footprint along its short axis.
In short, the stabilizers help to stabilize the PC094 in PC Mode. While not required if
hauling relatively light loads (and using the Light - Weight or Medium - Weight Lifting
Profiles), it is a good technique to extend the stabilizers EVERY TIME you are operating
the PC094 in PC Mode with an attached load.
To extend the stabilizers:
1. Ensure that the PC094 is stopped on level ground and clear of obstacles and hazards.
2. Press the release lever on the top of the stored stabilizer to unlock it.
3. Rotate the stabilizer until it locks into the extended position.
4. Repeat for the other stabilizer.
The stored Stabilizer (left - side). The shaded portion is the actual Stabilizer and the light gray portion is the release lever.