Smiley Lifting Solutions SPYDERCRANE PC094, Operator'S Manual

Page: 46 / 79

46
Operating Instructions
Starting and Stopping the PC094
Before starting the SPYDERCRANE PC094 for use:
•
Confirm that the PC094 is charged and has a full hydraulic oil tank
(use the Hydraulic Oil Sight Glass)
•
Ensure that the daily inspection has been completed before starting the
PC094 for use.
•
If traveling the PC094, ensure that it is not plugged in
•
The immediate area is cleared of obstacles
To start the PC094:

Insert the Ignition Key and rotate it clockwise until the PC094 stops.
To stop the PC094:

Rotate the Ignition Key counterclockwise and until the PC094 stops.

Remove and secure the Ignition Key.

If possible, plug - in the PC094 to maintain its Battery Array.
WARNING
Powering - Off the PC094 with an Attached Load
•
The SPYDERCRANE PC094 should never be powered - off and un-
attended while it has an attached load.
•
If the SPYDERCRANE PC094 must be powered - off while a load is
attached at the hook block; the load should be lowered to the ground.