Smiley Lifting Solutions SPYDERCRANE PC094, Operator'S Manual

Page: 11 / 79

11
GENERAL INFORMATION
General Description of the SPYDERCRANE PC094
What the PC094 IS
The SPYDERCRANE PC094 is designated as a Pick - and - Carry Crane (PCC) with
a hydraulically telescoping boom. The PC094 is designed specifically to be able to
travel under its own power (travel), pick up and maneuver an attached load
vertically and horizontally, and travel with an attached load.
The PC094 is designed to be traveled on improved, reinforced surfaces and in
structures like warehouses and mechanical spaces. The travel drive system is
expressly designed for smooth, safe travel over hard, smooth surfaces. The
dimensions of the PC094 are kept as narrow as possible to facilitate its use in
tight spaces and busy environments.
The charging system is supplied by 120VAC and the operating system is a
12VDC and 48VDC battery - electric. The PC094 is designed to be zero - emission
and low - noise. The power system of the PC094 is perfect for enclosed structures
with limited ventilation.
The battery array of the PC094 is capable of running the PC094 for several hours,
but it needs to be recharged daily - AT LEAST - to maintain a sufficient level - of -
charge in the battery array and to maintain the health of the individual batteries.
What the PC094 IS NOT
The SPYDERCRANE PC094 IS NOT designed for off - road or all - terrain use. The
PC094 has very limited travel angle (surface grade) limits and its use should be
limited to spaces with leveled and improved surfaces.
The PC094 is also NOT a tractor. While designed to be traveled with a load
attached to its boom, the PC094 should only carry loads that are suspended from
its hook block, or resting on its front fender. The PC094 should NEVER be used
to drag loads, either by its travel drive system, or its winch.