Smiley Lifting Solutions SPYDERCRANE PC094, Operator'S Manual

Page: 32 / 79

32
GENERAL INFORMATION
The External Features of the PC094
Rear, Travel Mode
1
Travel Control Group
The controls used to travel the PC094 when it is running.
The Travel Control Group is located at the end of the Tiller
Handle.
2 Crane Control Group
The Crane Control Group is the collective of controls and
indicators that are used to turn the PC094 on and off,
control the crane functions, charge the battery array, or
activate the Emergency Stop. The Crane Control Group is
located on the back of the PC094, below the Tiller Handle.
3 Tie - Back/Rear Tie - Down Point (left - side)
One of two tie - back/tie - down points for the rear of the
PC094. When fitted with a properly - rated shackle, this
point can be used to secure the PC094 to the ground, or
another structure.
4 Tie - Back/Rear Tie - Down Point (right - side)
One of two tie - back/tie - down points for the rear of the
PC094. When fitted with a properly - rated shackle, this
point can be used to secure the PC094 to the ground, or
another structure.
5 Steering Wheel
The single wheel at the back of the PC094 is not powered
but is connected to the Tiller and is used to turn the PC094
while it is being traveled.