Smiley Lifting Solutions SPYDERCRANE PC094, Operator'S Manual

Page: 61 / 79

61
Operating Instructions
Determining Lift Capacity of the PC094
Using the Rated Load Chart
After you have determined the PC094 ’ s working radius and boom stage, you can use the Rat-
ed Load Chart to figure out how much the PC094 can safely lift.
1. The left side of the Rated Load Chart has four Load Tables, one for each Boom
Stage. Select the table that corresponds with your PC094 ’ s Boom Stage.
2. Once you have selected the correct Load Table, find the Working Radius value that
matches the one you learned from the PC094 ’ s Boom Angle Indicator.
•
If the Working Radius you got from the Boom Angle Indicator DOES NOT
match the available Working Radius value on the correct Load Table, select
the NEXT HIGHER Working Radius value on the table.
3. Select the Rated Load value, based on whether you have extended the PC094 ’ s Sta-
bilizers.
•
The PC094 WILL NOT lift any load if its boom is in Stage 4 and the Stabi-
lizers HAVE NOT been extended.