Protection
Protection Part Operation
SKF Multilog On
-Line System IMx-M
2 - 45
User Manual
The
channel value
is displayed as a blue bar and also printed in text at the top together
with engineering unit and detection type.
1.
Select bar graph number (1 or 2) with up and down arrows.
2.
Confirm the selection with
OK
.
3.
Select a channel with up and down arrows, from analog channel 1 to 16 or
combined measurement 1 to 8.
4.
Confirm the selection with
OK
.
5.
To set the second bar graph, repeat steps 1 to 4.
To select graph number
To select a channel
Bar graph 1 display
Figure 2 - 22.
Bar Graph.
Buffered Outputs Front Menu
Select channels to be connected to the three buffered outputs at the front of the
protection module, two analog channels and one digital channel. For detailed
information, refer to
Front Panel BNC Buffered Outputs
of Buffered Outputs.
1.
Select a buffered output number (1 to 3) with up and down arrows.
Figure 2 - 23.
To Select a Buff O
ut.
2.
Confirm the selection with
OK
.
3.
Select a channel with up and down arrows.