SKF IMx-M, User Manual, Page: 154 / 293

Protection
Protection Module Configuration with IMx-M Manager
2 - 140
SKF Multilog O
n-Line System IMx-M
User Manual
Figure 2 - 112.
Setting the Alarm Levels.
For this example, once a radial shaft vibration channel has been configured, the
combined measurement can either be configured by pressing the
OK button
and selecting the new measurement from the “Combined Measurements”
configuration branch, or by instead pressing the “Combined Meas 2 (Ch3/Ch4)”
button (see figure above). This will save the current channel settings, then
launch a new “Combined Measurement” dialogue.