Protection
Protection Module Configuration with IMx-M Manager
SKF Multilog On
-Line System IMx-M
2 - 103
User Manual
Configuring an Analog Channel
Once the initial channel settings have been entered, and the
OK
button pressed, the
main
Analog Channel
configuration dialog will be immediately launched.
Figure 2 - 86.
Analog Channel Configuration Dialog.
Bar Graph
displays the alarm level, hysteresis and trip multiply factor against the
entered test value. Note that the entered test value is not stored.
Identification
Every channel should be given a name, ideally one which both assists in
identifying the sensor location and type. A comment field is also provided to
assist in identifying the channel.