Protection
Protection Module Configuration with IMx-M Manager
2 - 90
SKF Multilog O
n-Line System IMx-M
User Manual
Figure 2 - 73.
Adding a New Rack to the Hierarchy.
This dialog shows a representation of an empty IMx-M rack with two power supply units
fitted and fault detections enabled.
Rack Name
The first task is to assign a name to this rack. Given that each rack is a physical item
mounted in a geographical area, the name chosen should always be an easier reference
for future use (E.g. “MOL ROOM LOWER RACK”).
Configure System setup
The next task is to effectively “build” this virtual rack by populating each of the four
empty CMM + PRM slots and then adding a relay module to its associated CMM + PRM
slot. However as the rack can only hold a maximum of three relay modules, these can
only be associated with the first three CMM + PRM slots in the rack.