5. Lock ring
6. Adapter plate for outer side
7. Screws
8. Door lock (not included in the scope of supply)
9. Adapter plate for inner side
10. Screws
11. Inside fitting
12. Screws
13. Lower battery
14. Inside handle, including hexagon socket screw
15. Inside hexagon screw
16. Inlay
17. Inlay
Installation:
1. Optional: handles, escutcheons, fittings and other door furniture fitted
to the door are to be removed.
2. The SmartHandle 3062 is partly assembled when supplied; see Disas-
sembly.
3. The inlay cannot be fitted on some handles, such as offset handles,
when they are already installed. Push the inlay onto the handle with the
logo facing outwards before installing the handle. You can do this with
most handles.
4. Push inlay (1) onto the outer handle (3). Depending on the handle
model, it may not be possible to fit it once the handle is installed.
5. Insert outer handle (3) horizontally into the outer fitting (4), placing it in
the direction that you require, depending on whether it is a DIN left-hand
or right-hand door.
6. Place handle fastener piece (5) into position (see Figures 2 and 3).
7. Hold the outside handle (4) and use the spanner to rotate the handle
fastener piece (5) about 75° to the right until it fits into position (Figures
4 and 5). If you do not fit it correctly, the handle may come loose again.
8. First, you must adjust the four supplied mounting screws (10) to the
door thickness using the following formula. The screws (10) have also
been treated with thread-locking fluid to prevent the handle coming
loose due to vibrations, for example. Important: this fluid hardens within
24 hours of the screws being fastened for the first time. If the screws are
undone again, the fluid no longer secures the screws.
SmartHandle
(Manual)
7. Installation (manual)
86 / 136
