Automatic disengage (normal setting)
SmartHandle disengages automatically after the point in time specified in
the time zone plan.
Manual engage (normal setting)
SmartHandle does not disengage automatically after the pre-set time
interval until an authorised transponder or SmartCard makes a booking
after this point in time.
Automatic engage
SmartHandle engages automatically after the point in time specified in the
time zone plan (important: people who are not authorised to enter may
possibly gain access to the building or room concerned in such a case.
Security should therefore be provided at the entrance - by the presence of
a receptionist, for example).
The following options are available to you in the 'Transponder active' box:
Always
Transponders and SmartCards are not normally operative during the
release period. However, if you wish a door not to be freely used when
necessary (when everybody has left the building, for example), select this
option. This allows the time switch-over to be interrupted and activated
again manually.
Only if disengaged
In this operating mode, the transponder or SmartCard is not active during
the release interval, i.e. the smart handle is engaged, transponders and
SmartCards are not operative.
9.8 Permit exception in time zone management (G2)
This function is available in LSM editions 'LSM.BUSINESS' and
'LSM.PROFESSIONAL' or higher and in the 'LSM.RM' software module
(resource management). It must also be possible to address the locking
devices concerned via the WaveNet to use this function.
You can use the following functions with the resource management:
Setting of a start date for an authorisation
Setting of an end date for an authorisation
Exception rules for time zone groups
See the LSM Resource Management manual for more detailed information.
SmartHandle
(Manual)
9. Configuration
100 / 136
