Programme SmartHandle before installing.
Smart Handle may be difficult to fit in mortise locks with a retaining nut.
You must not alter the retaining nut in any way, using a file, for example;
otherwise, the handle's guide piece will no longer fit accurately.
When installing SmartHandle, you must ensure that the cable does not
get caught or fitted too tightly to the door.
Conventional fastening system, including MO: When fitting the handle
into position on the door with the two screws, make sure that the
electronics are not subject to mechanical load and are not damaged in
any other way.
For MO: The mechanical cylinder is not included in the supplied package
for SmartHandle with MO.
7.4.4 Conventional fastening system WO
Key:
1. Inlay
2. Inlay
3. Outside handle
4. Outer fitting
5. Lock ring
6. Door lock (not included in the scope of supply)
7. Spacing bolt
8. Inside fitting
9. Screws
10. Upper battery
11. Inside handle
12. Inside hexagon screw
13. Inlay
SmartHandle
(Manual)
7. Installation (manual)
52 / 136
