Up to 3,000 most recent transponder /smart card access events are
logged in the SmartHandle with the date, time and transponder ID
(TID).
MP
Up to 3,000 most recent smart card access events are logged in the
SmartHandle with the date, time and transponder ID (TID).
9.3 Time zone control
This function is only available in the ZK version.
A time zone plan can be uploaded and the transponders/smart cards are
approved or blocked according to their time zone group. You can use a
time zone plan to carry out a time-controlled switch-over.
G1
5 + 1 time zone groups in any time zone plans
G2
100 + 1 time zone groups in any time zone plans
9.4 Logging unauthorised attempted access events
This function is only available in the ZK version.
Normally, only authorised transponder /SmartCard operations are logged.
If you also wish to record attempts to open the door with a non-authorised
transponder or SmartCard, you need to select this option.
Unauthorised attempted access events include:
Attempted access without authorisation
Attempted access outside the pre-set time zone
Attempted access when the alarm is activated and a SimonsVoss Block
Lock is being used at the same time
As a general rule, only transponders/SmartCards belonging to the same
locking system are logged, i.e. they must feature the same locking system
ID (SID).
9.5 Flip flop
Pulse mode (default setting) is switched off and the pulse duration is no
longer in effect. When flip flop mode is activated, the SmartHandle
changes its status from engaged to disengaged or vice versa each time it is
activated using a transponder/SmartCard. This mode is suitable for
situations such as when a door needs to be used freely without a
transponder/SmartCard to allow visitors to enter, for instance
SmartHandle
(Manual)
9. Configuration
98 / 136
