Simons Voss Technologies SmartHandle 3062 Series Manual Download Page 102 | Manualshive

Page: 102 / 136

background image

IMPORTANT

If you use this configuration, it is no longer possible to open
SmartHandle with a transponder.

You can find a detailed description in the 'SmartRelay' manual.

9.14 Storage mode (G1)

All SmartHandles G1 are delivered in storage mode to save battery
capacity. SmartHandles cannot be addressed by transponders while in this
mode. Storage mode is deactivated when the SmartHandles are
programmed for the first time. It is also possible to remove storage mode
manually using programming software without creating a locking plan.

9.15 Freeze mode (G2)

If the second battery warning level is ignored, the SmartHandle
automatically switches to freeze mode. Once at this warning level,
SmartHandle can now only be activated using a G2 battery replacement ID
medium. Freeze mode prevents the batteries from being discharged
completely, so that the locking device can be opened one more time.

9.16 DoorMonitoring function

Activate the following settings to configure the DoorMonitoring function
and display:

9.16.1 Locking device properties: Configuration/Data: DoorMonitoring

SmartHandle

You can configure the DoorMonitoring functions in the SmartHandle using
the "Monitoring configuration" button on the "Configuration/Data" tab on
the locking device.

This function is only available if the SmartHandle features the DM property
and this was also directly added into the LSM software as "G2
SmartHandle DoorMonitoring".

SmartHandle

(Manual)

9. Configuration

102 / 136

«
...
100
101
102
103
104
...
»

Summary of Contents for SmartHandle 3062 Series









































































































































Reviews:

No comments

Related manuals for SmartHandle 3062 Series

Brand: Eastwood Pages: 12

Brand: Eastwood Pages: 16

Brand: Eastwood Pages: 4

Brand: Eastwood Pages: 12

Brand: ESAB Pages: 23

Brand: Allegion Pages: 5

Brand: Caladair Pages: 49

Brand: Migatronic Pages: 36

EASYHEAT PSR1006

Brand: Emerson Pages: 5

Brand: Panasonic Pages: 23

Brand: Panasonic Pages: 60

Brand: Panasonic Pages: 64

SKYARC ULTRA 3140

Brand: Sweiss Pages: 31

Brand: Detex Pages: 14

Advantex 10 Series

Brand: Detex Pages: 17

Brand: Parkside Pages: 101

Brand: Record Pages: 34

Brand: ESAB Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands