5.18 SmartHandle without electronics
A SmartHandle 3062 without electronics can be supplied on request for
design reasons. The spindle is always continuous in such handles, so that
the door can always be operated or opened from the inside or outside
without a medium such as a transponder. The MO variant must be selected
for locking the door, which can be locked using an additional cylinder in this
variant.
5.19 SKG
SmartHandle 3062 with SKG certification (SKG**) also satisfies high
security requirements. This version of SmartHandle 3062 guarantees that it
will remain fully functional for the long term even under extreme conditions
and provide optimum protection against break-ins or tampering.
5.20 DoorMonitoring (DM)
with DoorMonitoring (DM) is an electronic door fitting with integrated door
monitoring. The integrated door monitoring system in the DM Cylinder is
fitted without any wiring to the door.
SmartHandles with the DoorMonitoring function may only be used in
combination with self-locking panic locks. The DoorMonitoring
SmartHandle with external "sensor lock" sensors can also be used as a MO
version.
Sensors inside the DM SmartHandle 3062 monitor the door opening status.
The DM SmartHandle 3062 logs access events (access lists) and monitors
door status and changes to door status (open, closed, locked, securely
locked, manipulation attempt and forced entry).
The following door statuses are logged:
Door open/closed
Door unlocked/securely locked
Alarm
These door statuses can be transmitted to LSM via the WaveNet network,
where they can be displayed, so that the user can see the door status
easily.
The LSM software allows you to define events which trigger a definable,
time-dependent response, such as a pop-up window with a warning or an
email, when the status of a locking device changes.
Alarms can be transmitted to third-party software in LSM Basic (from
Version 3.3).
SmartHandle
(Manual)
5. Designs
26 / 136
