4-41
Section 4
Special Printing
15
Overlap the liner and the media so that their right edges
are aligned, and set so that the top edge of the mesh
tarpaulin protrudes from the rear cover.
If the right edge does not align correctly, shift the mesh tarpaulin to
the left or right so as to align with the liner position.
16
Push the pressure roller up/down lever down.
17
Set the media edge guard, and close the rear cover.
Check if the media edge guard is located
under the media.
Media edge guard
Printing on Mesh Tarpaulin
Summary of Contents for IP-6900
Page 4: ......
