4-43
Section 4
Special Printing
- If the mesh tarpaulin is narrower than the liner, set "DETECT
WIDTH" to "MANUAL1" in the ENTRY menu. Selecting
"AUTO" allows the printer to recognize the liner width as the
mesh tarpaulin width and to print the data at the right edge
on the liner.
The contents set with the ENTRY menu are as follows:
DETECT WIDTH
→
MANUAL1
SIZE
→
Enter the mesh tarpaulin width
SIZE2
→
Enter the liner width
20
Select the liner.
Select "USED" with the
or
key.
Press the
key to change the
setting.
Press the
key to hold the last
setting as it is.
21
Press the feed switch to slacken the mesh tarpaulin and
install the tension bar.
LINER
SELECT: USED
Tension bar
NOTE
Printing on Mesh Tarpaulin
Summary of Contents for IP-6900
Page 4: ......
