2-80
-
The printer performs fill cap operation to maintain good
head condition after the first 20 hours in the print wait state
and every 3 days thereafter.
It is recommended to keep the printer ON except when the
printer is not used for a long time.
Avoid leaving the printer with no ink for one month or more
for head protection.
-
Do not open and close the rear cover and do not lift and
push down the levers during service cleaning and head
washing.
If this is done, the printer may start service cleaning and
head washing from the beginning.
NOTE
When Restarting the Printer After a Long Absence (within 2 weeks) in Power OFF State
<Head Washing>
Cleaning the head and ink path with cleaning liquid.
Six cleaning liquid cartridges and six dummy cartridges are mandatory.
Prepare the cleaning kit (IP6-117).
Six cleaning liquid cartridges (IP6-119) and six dummy cartridges
(IP6-118) are packed together in the cleaning kit.
Six cleaning liquid cartridges are used up by one head wash.
After performing the head wash, fill the ink.
#SERVICE
>HEAD WASH
Summary of Contents for IP-6900
Page 4: ......
