3-36
(21)
Cleaning mode
Selects a cleaning mode to be performed automatically during
printing.
<Parameter (Enter a value)>
MODE 1: Performs cleaning automatically according to the
print history record at the start of printing or at the
end of printing.
MODE 2: Performs cleaning automatically at regular intervals
during printing. (Select this mode when using
media such as PVC sensitive to the heater
temperature.)
MODE 3:
Performs cleaning automatically at regular intervals
during printing. (Select this mode when
using media such as tarpaulin insensitive to the
heater temperature.)
- When sequence 2 has been set as the media feed mode,
the printer performs the same as in "mode 1" even if "mode
2" is selected.
- When selecting mode 2, separator lines will be generated
on the print because cleaning is performed during printing.
These lines can be adjusted with media back correction
value input in the "BACK ADJUS" menu.
However, these lines may be shifted depending on the
media, and in such a case, use "mode 1" or "mode 3".
- In case of "mode 2", complete printing of the image before
and after the separator line, and then perform cleaning.
- In case of "mode 3", perform cleaning with the separator
line in the midway of print path status.
# CLEANING MODE
>01: MODE 1
NOTES
Summary of Contents for IP-6900
Page 4: ......
