4-26
3
Set the sub scroller in the printer.
The set position varies depending on the
printing method.
- Printing on back side from take-up unit
→
Set the sub scroller on the spare holder
close to the pressure roller up/down
lever (A in the figure).
- Printing on back side from the feeder
- After rewinding, print on the back side
feeding from the feeder.
→
Set the sub scroller in the sub scroller
holder (B in the figure).
4
Bend the top edge of the liner by about 5 cm, and insert it
into the feeder.
- As the liner is thin and very weak in stiffness, it could be
caught in the grid roller when it is inserted unless the top
edge is bent.
A
B
NOTE
Summary of Contents for IP-6900
Page 4: ......
