4-7
Section 4
Special Printing
Double-Sided Printing
- The drying time of a printed side varies depending on the
image. Confirm that the printed side has dried before per-
forming the next operation.
In general, dry the printed side for more than 3 hours (a whole
day and night in case of printing with dark density), and then
print on the back side.
- Wind up the liner set to the sub scroller and secure the top
edge of the liner to the roll with tape. Printing on the back
side with the top edge of the liner hanging causes false de-
tection by the sensor, resulting in malfunction.
5
Insert the media edge into the feeder.
Feed the printed media edge toward the feeder through the top sur-
face of the sub scroller, and insert it into the feeder. (Front and rear
are reversed.)
Broken line for
cutting guideline
Solid line for
aligning the back
side position
NOTES
Summary of Contents for IP-6900
Page 4: ......
