2-35
Section 2 Basic Operations
7
Remove the scroller.
(1) Rotate the handwheel counterclockwise.
(2) When a gap appears between the handwheel
and scroller shaft, remove the scroller.
-
Do not touch the scroller hook.
NOTE
Replacing Media on Main Scroller
1
The following message appears on the LCD screen.
2
Replace the media following "Installing/Removing the
Media."
Replacing Media on Sub Scroller
1
The following message appears on the LCD screen.
-
If the bottom edge of the media on the sub scroller has
been secured with tapes, the media end is detected with a
jam error. In this case, cleaning is not executed.
-
If the media is not secured with tapes, the media end is
detected by the feed sensor.
Replacing Jammed Media Roll
See “
Clearing Media Jam” in Section 6, Troubleshooting
.
LIFT LEVER
SET PAPER
NOTES
Installing/Removing the Media
Summary of Contents for IP-6900
Page 4: ......
